GLF76311

Nano-Current Consumed Power On/Off Control IC

Request Samples

GLF76311 package

0.97mm x 0.97mm 
0.55mm thick
0.5mm pitch
4 bump
WLCSP

Features

  • Ultra-Low ISD : 7 nA Typ @ 3.6 VBAT
  • Ultra-Low IQ : 6 nA Typ @ 3.6 VBAT
  • Low RON : 34 mΩ Typ @ 3.6 VBAT
  • IOUT Max : 2 A
  • Wide Input Range: 2.5 V to 5.5 V
    6 Vabs Max.
  • Turn-On Delay Time, 3 s Typ.
  • Turn-Off Delay Time, 6 s Typ.
  • Controlled VOUT Rise Time: 1 ms at 3.6 VBAT
  • Integrated Output Discharge Switch When Disabled
  • Operating Temperature Range: - 40 to 85 °C
  • HBM: 8 kV, CDM: 2 kV
  • Ultra-Small: 0.97 mm x 0.97 mm x 0.55 mm WLCSP

Applications

  • Smart Devices
  • Mobile handheld device

FUNCTIONAL BLOCK SCHEMATIC

GLF 71311 schematic

APPLICATION SCHEMATIC

GLF76311 Application schematic

PRODUCT DESCRIPTION

The GLF76311 is an ultra-thin, ultra-efficient IQSmartTM load switch with an integrated on and off delay timer for Smart bracelet and Mobile handheld devices.

When the VBAT pin is connected to the battery, the main switch of GLF76311 is turned on, that is the default state. During the normal operation mode, pulling the SW pin to a low level for 6 seconds turns off the GLF76311 and the entire system enters the ultra-deep sleep energy-saving mode.

When the GLF76311 is off, pulling the SW pin to a low level for 3 seconds activates the GLF76311 again and the entire system enters the normal working mode.

The GLF76311 helps to reduce power consumption with the best in class RON, a breakthrough on state IQ of only 6 nA when the switch is on and ultra-low ISD of only 7 nA when switch is off. This switch can help significantly extend the system battery life in mobile devices during shipping or in extended shutdown times.

An integrated 1 ms slew rate control can also enhance system reliability by mitigating bus voltage swings during switching events, where uncontrolled switching can generate high inrush currents that result in voltage droop and/or bus reset events. The GLF slew rate control specifically limits inrush currents during turn-on to minimize voltage droop. The output discharge function makes the output voltage shut off safely.

The GLF76311 is available in 0.97 mm x 0.97 mm x 0.55 mm wafer level chip scale package (WLCSP).

Sampling
243
AdobeStock_270328446_Preview

NOTE: Spec values & feature set for "Coming Soon" and "Development" devices are provided on a best estimate basis, based on available data at time of estimate. Values are subject to change. GLF makes no warrenties that it will release or offer for sale products that are marked “Coming Soon” or “Development” "Integrated Features" Table Key: √ = Feature Included, P = Programmable Feature

Explore Other GLF Products


Best In Class Efficient On/Off Power Switching for Enhanced Battery Life & System Reliability

  • Ultra-Low Leakage at Standby & Operation to Save Limited Battery Lifetime
  • Best in Class RON to Reduce Voltage Drop
  • Ultra-Small/Thin Packages to Tiny Modules

GLF Efuse 

Best In Class Efficient Deep Sleep Protection

  • Slew Rate Control / Inrush Protection
  • Reverse Current Protection (RCB)
  • Ultra-Low Leakage at Standby & Operation to Save Limited Battery Lifetime
  • Best in Class RON to Reduce Voltage Drop
  • Ultra-Small/Thin Packages to Tiny Modules

GLF Efuse

 
Best In Class Efficient Power Reset Protection

  • Efficient Power Reset Control IC
  • Ultra-Low Leakage at Standby & Operation to Save Limited Battery Lifetime
  • Best in Class RON to Reduce Voltage Drop
  • Ultra-Small/Thin Packages to Tiny Modules

Loadswitch vert 

Best In Class Efficient On/Off Battery Protection Switch with Multiple Protection Features

  • Low IQ
  • Small Size

GLF Powermux

 
Best in Class, Efficient, & Simple Power Rail Switching

  • Multiple Protection Features
  • Ultra-Low ISD
  • Low IQ
  • Two Input Sources and One Output
  • Manual and Auto Selection Mode

Efficient Current Limited PowerSwitch

  • Low IQ
  • Small Size